2 Centres d’usinages HAAS VF4 ; Table 20’’ X 50’’ Hauteur de 25’’
| TRAVELS | S.A.E | METRIC |
|---|---|---|
| X Axis | 50.0 in | 1270 mm |
| Y Axis | 20.0 in | 508 mm |
| Z Axis | 25.0 in | 635 mm |
| Spindle Nose to Table (~ max) | 29.2 in | 742 mm |
| Spindle Nose to Table (~ min) | 4.2 in | 107 mm |
| SPINDLE | S.A.E | METRIC |
|---|---|---|
| Max Rating | 30.0 hp | 22.4 kW |
| Max Speed | 8100 rpm | 8100 rpm |
| Max Torque | 90 ft-lbf @ 2000 rpm | 122 Nm @ 2000 rpm |
| Max Torque w/opt Gearbox | 250 ft-lbf @ 450 rpm | 339 Nm @ 450 rpm |
| Drive System | Inline Direct-Drive | Inline Direct-Drive |
| Taper | CT or BT 40 | CT or BT 40 |
| Bearing Lubrication | Air / Oil Injection | Air / Oil Injection |
| Cooling | Liquid Cooled | Liquid Cooled |
| TABLE | S.A.E | METRIC |
|---|---|---|
| Length | 52.0 in | 1321 mm |
| Width | 18.0 in | 457 mm |
| T-Slot Width | 0.630 in | 16 mm |
| T-Slot Center Distance | 3.15 in | 80 mm |
| Number of Std T-Slots | 5 | 5 |
| Max Weight on Table (evenly distributed) | 3500 lb | 1588 kg |
| FEEDRATES | S.A.E | METRIC |
|---|---|---|
| Max Cutting | 650 ipm | 16.5 m/min |
| Rapids on X | 1000 ipm | 25.4 m/min |
| Rapids on Y | 1000 ipm | 25.4 m/min |
| Rapids on Z | 1000 ipm | 25.4 m/min |
| AXIS MOTORS | S.A.E | METRIC |
|---|---|---|
| Max Thrust X | 2550 lbf | 11343 N |
| Max Thrust Y | 2550 lbf | 11343 N |
| Max Thrust Z | 4200 lbf | 18683 N |
| TOOL CHANGER | S.A.E | METRIC |
|---|---|---|
| Type | Carousel | Carousel |
| Capacity | 20 | 20 |
| Max Tool Diameter (full) | 3.5 in | 89 mm |
| Max Tool Weight | 12 lb | 5.4 kg |
| Tool-to-Tool (avg) | 4.2 s | 4.2 s |
| Chip-to-Chip (avg) | 4.5 s | 4.5 s |
ww